Prototipe Track Inspection Car Indonesian Railway Academy API-02

  • dadang sanjaya atmaja Indonesian Railway Polytechnics of Madiun
  • Moch Aziz Kurniawan Indonesian Railway Polytechnics of Madiun
Keywords: Inspection railway, wheels, chassis, BLDC electrical motor, body of railway inspection.

Abstract

Inspection railway are a re-design of railway that have been made in the Indonesian Railway Polytechnic. Inspection lorry repairs are carried out on the wheels, chassis, drive and body.The new lorry wheels are made of structural iron to reduce the total weight from 148 kg to 119 kg. The size of the wheel conus is the difference between the outer and inner diameter of 30 mm to minimize wheel friction with rails in the curved region. The chassis uses the ledder frame model with emphasis on the strength of 44.29 MPa and 0.095 MPa deflection to get optimal and reliable results on the 1067 track. The material uses galvanized hollow type iron weighing 125 kg. The environmentally friendly drive used in the railway inspection is an BLDC electric motor (brushless direct current) with a capacity of 2000 watts of power, a current of 35A and a rotational speed of 4250 Rpm. The railway inspection body is made of 3 layers fiber reinforced polymers of plastics (FRP) using a hand lay-up method that has a tensile stress value of 40.18 MPa and a strain value of 0.89%. The inspection body focuses on the aesthetics and ergonomics aspects in the form of a more attractive appearance, smoothness of design, passenger comfort and color harmony so that they have high selling.

References

Abdullah, K. d. (2005). "Penelitian Pembuatan Badan Roda Lori Dari Pelat Baja Hasil Rol Panas Dengan Metode Proses Tarik Dalam". Bandung: Metal Indonesia.

Munawar, A. (2007)."Perhitungan Pada Poros Penggerak". Jakarta: Academia Education.

Khurni, R.S, Guptap,J.K,(2005) "A Text Book of Machine Design", Eurasia Publishing House (PVT.) LTD, India.

Gunadi, Herminarto.(2004). "Perancangan Bodi Kendaraan". Yogyakarta.

Agung D.Y., Sasongko (2015). P.H., Suharyanto. "Pengendalian Kecepatan Motor Brushless DC (BLDC) menggunakan Metode Logika Fuzzy". Jurnal Jurusan Teknik Elektro Fakultas Teknik. Yogyakarta: Universitas Gadjah Mada.

Al-Mashakbel, Atef Saleh Othman. (2009). "Proportional Integral and Derivative Control of Brushless DC Motor". Europe Journal of Scientific Research Vol.35 No.02, PP : 198-203.

Kumar, Brajesh dkk. (2017). "Controller Design for Closed Loop Speed Control of BLDC Motor". International Journal of Electrical Engineering and Informatics Vol. 09, No. 01, PP: 146-160.

Roedy K., Wahyunggoro O. Nugraha P. (2015). "Sistem Kendali Kecepatan Motor BLDC Menggunakan Algoritma Hybrid PID_FUZZY. Jurusan teknik elektro –ATW Surakarta. Uneversity Research Colloquium".

Nanang M. (2015). "Desain Controller Motor Bldc Untuk Meningkatkan Performa Output (Daya) Pada Sepeda Motor Listrik". Thesis. Institut Sepuluh Nopember.

Demollic. (2010). "Pembuatan Bodi Mobil dan Modifikasi Chasis". Tugas Akhir Jurusan Teknik Mesin Otomotif. Surakarta : Universitas Sebelas Maret.

Dimas T. (2016).Pembuatan Produk dan Moulding Bumper Belakang Mobil Kijang Innova (V-2005) Berbahan Serat Glass Acak. Tugas Akhir Jurusan Teknik Mesin. Yogyakarta: Politeknik Muhammadiyah Yogyakarta.

Ermawan, Agustinus Adi. (2018). "Penambahan Persentase Serat dan Jumlah Lapisan (1-3) Terhadap Kekuatan Tarik Komposit Fiberglass-Polyester (Yukalac C-108 B Justus)". Skripsi Jurusan Teknik Yogyakarta: Mesin Universitas Sanata Dharma.

Nugroho, Yosep Dwi. (2016). "Karakteristik Komposit Serat Glass Dengan Variasi Jumlah Lapisan Serat". Skripsi Jurusan Teknik Mesin. Yogyakarta: Universitas Sanata Dharma.

Ocky S. P. (2015). "Proses Pembuatan Bodi pada Mobil Listrik Menggunakan Bahan Komposit". Tugas Akhir Jurusan Teknik Mesin. Semarang: Universitas Negeri Semarang.

Sujatmika, Hanif. (2018) Perancangan Dan Pembuatan Rangka Atas Kereta Lori Inspeksi Di Lingkungan Kampus Akademi Perkeretaapian Indonesia. Tugas Akhir Jurusan Teknik Mekanika Perkeretaapian.Madiun : Akademi Perkeretaapian Indonesia.

Published
2020-03-14